Migatronic Welding Machine

Product Details:

MIGATRONIC Model: Automig2-273i

273 I (270 amps power source In Built Wire Feeder with Synergic Pulse Panel , Air cooled)

Microprocessor based IGBT controlled Digital Inverter Based CV power source for MIG/MAG welding

The machine consists of:

• 270 amps CC power source
• In- Built Wire feeder with 4 roll Drive
• Synergic Pulse MIG Panel
• Earth cable 35 sqmm- 3 mtrs
• MIG torch  ML 250 Twist AIR Cooled
• Regulator ARGON with Flow meter

Product Details:

Make: MIGATRONIC   Model: SIGMA ^Next 400 Synergic

(400 amps power source -  )

Microprocessor based IGBT controlled Digital Inverter Based CC/CV  power source for MIG/MAG  welding machine consists of:

 

·         400 amps CC/CV power source,

 

Additional Information:

• Delivery Time: 1Weeks
• Packaging Details: Power Source

Product Details:

Make : MIGATRONIC    Model : ARC 250 250Amps Three Phase Inverter based Arc Welding Machine is delivered with 35Sqmm Welding cable 3Mtrs with Electrode holder & 35Sqmm Welding cable 3 Mtrs return cable with Earth clamp

Additional Information:

• Delivery Time: 2DAYS

Product Details:

   We are offering Scout 400 ARC Welding Machine to our valuable clients.

Product Details:

Make: MIGATRONIC      Model: MIG 405 S                                             Diode Based 400Amps MIG/MAG Welding Machine Consists of ·         Power Source ·         Wire Feeder ·         5Mtrs Interconnection Cable, ·         400Amps MIG Torch, ·         3Mtrs Earth Cable with Earth Clamp, Regulator with Heater core Assy.

Product Details:

Make :MIGATRONIC  Model : MIG SCOUT-400 Auto Inverter Based 400 Amps MIG/MAG Welding Machine Power source Consist of

• Power Source
• External  Servo Wire Feeder
• 5 Interconnection Cable,
• MIG Torch 3 Mtrs
• 3Mtrs Earth Cable with Earth Clamp

The MIG welding process is semi-automated. This is also called as Gas Metal Arc Welding (GMAW). The process of MIG welding was developed in 1940. As this is a semi-automated process so there is a constant supply of filler wire in the form of MIG wire. This wire is being supplied by wire feeder which has a motorized function. The wire passed through the liner which also has a gas feeding through the same cable to the point where an arc is formed. The MIG welding is used in fabrication where higher production is required. The process needs electricity to produce heat, electrode or filler wire for the joint and inert gas to protect the welding joint from the air in the form of an inert gas of Co2. We ask you to buy MIG welder and if a robot is used in this welding process this welding becomes automatic. This MIG welding process is fast, cost effective and produces more welding units in a small period of time so it is a more effective method of welding.

 

The types of wire used are Carbon steel, stainless steel, and Aluminium. The wire feeder needs special change for the Aluminium wire filler. The carbon steel is best suited for the MIG welding. The welding by MIG are as welding is clean without smoke, very cheap, fast, time-saving in changing of the electrode is minimum so time efficient. It is good for spot and tack welds

Product Details:

Make :MIGATRONIC  Model : MIG SCOUT-500 IGBT Inverter Based 500 Amps MIG/MAG Welding Machine Power source Consist of-

• Power Source
• External  Servo Wire Feeder
• 5 Interconnection Cable,
• 500Amps MIG Torch – 3 Mtrs
• 3Mtrs Earth Cable with Earth Clamp

The MIG welding process is semi-automated. This is also called as Gas Metal Arc Welding (GMAW). The process of MIG welding was developed in 1940. As this is a semi-automated process so there is a constant supply of filler wire in the form of MIG wire. This wire is being supplied by wire feeder which has a motorized function. The wire passed through the liner which also has a gas feeding through the same cable to the point where an arc is formed. The MIG welding is used in fabrication where higher production is required. The process needs electricity to produce heat, electrode or filler wire for the joint and inert gas to protect the welding joint from the air in the form of an inert gas of Co2. We ask you to buy MIG welder and if a robot is used in this welding process this welding becomes automatic. This MIG welding process is fast, cost effective and produces more welding units in a small period of time so it is a more effective method of welding.

The types of wire used are Carbon steel, stainless steel, and Aluminium. The wire feeder needs special change for the Aluminium wire filler. The carbon steel is best suited for the MIG welding. The welding by MIG are as welding is clean without smoke, very cheap, fast, time-saving in changing of the electrode is minimum so time efficient. It is good for spot and tack welds

Product Details:

The Automig 300 Pulse is the welding machine for repairing cars and building up car bodies in professional workshops. It is designed to meet carmakers’ standards for joining processes in thin high-tensile steel, aluminium and stainless steel.

Make: MIGATRONIC   Model: AUTO MIG 300I Pulse

(300 amps power source - IN-Built  Wire Feeder with Synergic Graphic  Panel )

The MIG welding process is semi-automated. This is also called as Gas Metal Arc Welding (GMAW). The process of MIG welding was developed in 1940. As this is a semi-automated process so there is a constant supply of filler wire in the form of MIG wire. This wire is being supplied by wire feeder which has a motorized function. The wire passed through the liner which also has a gas feeding through the same cable to the point where an arc is formed. The MIG welding is used in fabrication where higher production is required. The process needs electricity to produce heat, electrode or filler wire for the joint and inert gas to protect the welding joint from the air in the form of an inert gas of Co2. We ask you to buy MIG welder and if a robot is used in this welding process this welding becomes automatic. This MIG welding process is fast, cost effective and produces more welding units in a small period of time so it is a more effective method of welding.

The types of wire used are Carbon steel, stainless steel, and Aluminium. The wire feeder needs special change for the Aluminium wire filler. The carbon steel is best suited for the MIG welding. The welding by MIG are as welding is clean without smoke, very cheap, fast, time-saving in changing of the electrode is minimum so time efficient. It is good for spot and tack welds

 

Product Details:

Make: MIGATRONIC   Model: TIG SCOUT 200HP Inverter based 200amps TIG Welding Machine with TIG Torch, Earth cable with earth clamp

Product Details:

Make: MIGATRONIC   Model: PI 350 DCHP -V

( 350Amps Power Source, Microprocessor based IGBT controlled Digital Inverter Based CC  power source for TIG/MMA  welding )

The machine consists of

·         350Amps CC Power source

·         PI 350 Digital DC Control Panel

·         Water cooling Unit

·         4Mtrs Water cooled MIGATRONIC

·         Earth Cable 3Mtrs -50MM2,

·         Trolley for Welding Machine with cylinder mounting attachment

Product Details:

Make: Migatronic   Model: Miga Cut 70
70Amps IGBT Inverter Based Heavy Duty Plasma Cutting Machine with  Plasma Cutting Torch, Air Regulator & Earth Cable with Clamp.

Product Details:

Make: MIGATRONIC  
Model: Sigma Select-300 IAC

(300 amps power source – In-Built Wire Feeder with Synergic Graphic  Panel ) Microprocessor based IGBT controlled Digital Inverter Based CC/CV  power source for MIG/MAG  welding machine consists of:

• 300 amps CC/CV power source,
• In-built  Wire feeder with 4 roll Drive
• Synergic Graphic Panel with Pulse
• Earth cable - 3 mtrs
• MIG torch – 300 amps AIR Cooled

Trolley for Welding Machine with cylinder mounting attachment,

Product Details:

Make: MIGATRONIC   Model: PI 500 DC

( 500Amps Power Source, Microprocessor based IGBT controlled Digital Inverter Based CC  power source for TIG/MMA  welding )

The machine consists of

·         500Amps CC Power source

·         PI 500 Digital DC Control Panel

·         In-built Water cooling Unit

·         4Mtrs Water cooled Tig Torch 

·         Earth Cable 3Mtrs -70MM2,

Trolley for Welding Machine with cylinder mounting attachment

Product Details:

Make: Migatronic   Model: Miga Cut 60
60Amps  Inverter Based  Plasma Cutting Machine with  Plasma Cutting Torch, Air Regulator & Earth Cable with Clamp

Product Details:

Make: Migatronic   Model: Miga Cut 100
100Amps IGBT Inverter Based Heavy Duty Plasma Cutting Machine with  Plasma Cutting Torch, Air Regulator & Earth Cable with Clamp.

Product Details:

The MIG welding process is semi-automated. This is also called as Gas Metal Arc Welding (GMAW). The process of MIG welding was developed in 1940. As this is a semi-automated process so there is a constant supply of filler wire in the form of MIG wire. This wire is being supplied by wire feeder which has a motorized function. The wire passed through the liner which also has a gas feeding through the same cable to the point where an arc is formed. The MIG welding is used in fabrication where higher production is required. The process needs electricity to produce heat, electrode or filler wire for the joint and inert gas to protect the welding joint from the air in the form of an inert gas of Co2. We ask you to buy MIG welder and if a robot is used in this welding process this welding becomes automatic. This MIG welding process is fast, cost effective and produces more welding units in a small period of time so it is a more effective method of welding.

The types of wire used are Carbon steel, stainless steel, and Aluminium. The wire feeder needs special change for the Aluminium wire filler. The carbon steel is best suited for the MIG welding. The welding by MIG are as welding is clean without smoke, very cheap, fast, time-saving in changing of the electrode is minimum so time efficient. It is good for spot and tack welds

Additional Information:

• Packaging Details: Power Source Wire Feeder Unit InterConnection Cable 3Mtr Earth Cable with Clamp 3Mtr Mig Torch Regulator Heater Core Assembly

Product Details:

Make  : MIGATRONIC

Model : MIG SCOUT 350 IGBT Inverter Based

350 Amps MIG/MAG Welding Machine Power source Consist of-

• Power Source
• External  Servo Wire Feeder
• 5 Interconnection Cable
• MIG Torch – 3 Mtrs
• 3Mtrs Earth Cable with Earth Clamp

Features:

• Infinitely variable MIG / MAG welder with/without MMA Option.
• High performance IGBT invertors.
• Separate wire feeder units.
• Continuously adjustable welding current, voltage, creator current and creator voltage. Adjustable inductor for spatter free welding.
• Suits from simple to Heavy duty welding applications.
• Mig Scout Auto Suits to sheet metal / Auto Industries Production application.
• Mig Scout 400 Auto Carries FHP wire Feeder Motor capable of MIG | MAG | MMA Processes.

Product Details:

Make: MIGATRONIC   Model: PI 250 DCHP -V

( 250Amps Power Source, Microprocessor based IGBT controlled Digital Inverter Based CC  power source for TIG/MMA  welding )

The machine consists of

·         250Amps CC Power source

·         PI 250 Digital DC Control Panel

·         4Mtrs Air cooled

Earth Cable 3Mtrs