ESAB INDIA GROUP

Product Details:

Make: ESAB Model:  Xpert ARC 200 Inverter Based single phase 200Amps ARC Welding Machine 2 Mtrs Welding cable with electrode holder, 2Mtrs Earth cable with Earth clamp

Product Details:

Make: ESAB Model:  ARC 200i  Inverter Based single phase 200Amps ARC Welding Machine 3 Mtrs Welding cable with electrode holder, 3 Mtrs Earth cable with Earth clamp

Product Details:

Make : ESAB  Model : ARC 250I 250Amps single Phase Inverter based Arc Welding Machine is delivered with 3Mtrs cable with Electrode holder & 3Mtrs return cable with Earth clamp

Additional Information:

• Delivery Time: Immediate

Product Details:

ARC 300i, Package consist of  ARC 300i Power source with 3mtr supply cable with 2nos of OKC male connector.

Product Details:

ESAB Make 400 Amps Arc Welding Machine

Model : ARC 400i, Package consist of

ARC 400i Power source with 3mtr supply cable with 2nos of OKC male connector.

Product Details:

ESAB Make 400 Amps Arc Welding Machine Model : BUDDY ARC 400i, Package consist of BUDDY ARC 400i Power source with 3mtr supply cable with 2nos of OKC male connector

Product Details:

ESAB Make 400 Amps Arc Welding Machine Model : ARC 400i, Package consist of ARC 400i Power source with 3mtr supply cable with 2nos of OKC male connector.

Product Details:

Make: ESAB Model : RS 400 3 Phase Fully Semi Thyristor Based 400 Amps ARC Welding Rectifier Machine Power source.

Product Details:

ESAB Make 630 Amps Arc Welding Machine Model: ARC 630I is delivered 3mtr mains cable, 2nos OKC connector

Product Details:

Migmatic 250 allows high speed welding without compromising quality on thin sheets having the wire feeder as a separable unit.

Salient Features

· Easy to set and operate.

· Digital VA meter.

· 10 step single knob voltage control.

· Heavy duty built-in feed system.

· Stepless speed control.

· Wire feed speed up to 22 m/min.

· Quick changeover wire feed mechanism.

· Suitable for 0.8 – 1.2 mm wire.

· Spot, Stitch and continuous welding modes.

· 2 / 4 stroke welding.

· Wire feeder with 5m interconnection standard.

· Thermal overload protection.

Product Details:

Make: ESAB Model: MIG 300i

Inverter Based 300Amps MIG/MAG Welding Machine Consists of

· Power Source,

· External Wire Feeder,

· 5 Mtrs Interconnection Cable,

· 250Amps MIG Torch,

· 3Mtrs Earth Cable with Earth Clamp

The MIG welding process is semi-automated. This is also called as Gas Metal Arc Welding (GMAW). The process of MIG welding was developed in 1940. As this is a semi-automated process so there is a constant supply of filler wire in the form of MIG wire. This wire is being supplied by wire feeder which has a motorized function. The wire passed through the liner which also has a gas feeding through the same cable to the point where an arc is formed. The MIG welding is used in fabrication where higher production is required. The process needs electricity to produce heat, electrode or filler wire for the joint and inert gas to protect the welding joint from the air in the form of an inert gas of Co2. We ask you to buy MIG welder and if a robot is used in this welding process this welding becomes automatic. This MIG welding process is fast, cost effective and produces more welding units in a small period of time so it is a more effective method of welding.

The types of wire used are Carbon steel, stainless steel, and Aluminium. The wire feeder needs special change for the Aluminium wire filler. The carbon steel is best suited for the MIG welding. The welding by MIG are as welding is clean without smoke, very cheap, fast, time-saving in changing of the electrode is minimum so time efficient. It is good for spot and tack welds

Product Details:

Make :ESAB  Model : Auto K-400    

3 Phase Fully Thyristor Based 400 Amps MIG/MAG Welding Machine Power source Consist of-

• Power Source
• External  Servo Wire Feeder
• 5 Mtrs Interconnection Cable,
• MIG Torch-3Mtrs
• 2Mtrs Earth Cable with Earth Clamp
• Co2 Regulator & Heater Core Assembly

Auto K-400 is a thyristorised MIG/ MAG power source with a compact design for optimised use of floor space. The rugged design wire-feeder is best suited to withstand tough and dusty working conditions. Its excellent arc stability and smooth welding in a range of materials, thicknesses and applications makes it the preferred choice of customers.

Features

• Compact and Light Weight - Improved Portability
• User Friendly Controls - Digital Ammeter and Voltmeter
• Crater Control for smooth weld finish
• Excellent Weld characteristics for reduced rework
• Digital V/A Meters.
• Fully thyristorised hex phase control.
• Stick out control
• Crater control
• Quick arc start
• Suitable for solid & flux cored wires

Product Details:

Make :ESAB  Model : BUDDY MIG 400I

 IGBT Inverter Based 400 Amps MIG/MAG Welding Machine Power source Consist of

Power Source, Wire Feeder,5 Interconnection Cable, MIG Torch – 3 Mtrs,3Mtrs Earth Cable with Earth Clamp ,Co2 Regulator & Heater Core Assembly

Product Details:

MIG 400i CCCV is an IGBT based inverter controlled power source designed for MIG and MMA welding

Special Feature:

· Suitable for continuous use

· Energy efficient – Low No load power conserving energy under idle condition

· High Productivity – max. wire feed speed of 25m/min

· User friendly controls – Crater current & voltage, Inductance

The MIG welding process is semi-automated. This is also called as Gas Metal Arc Welding (GMAW). The process of MIG welding was developed in 1940. As this is a semi-automated process so there is a constant supply of filler wire in the form of MIG wire. This wire is being supplied by wire feeder which has a motorized function. The wire passed through the liner which also has a gas feeding through the same cable to the point where an arc is formed. The MIG welding is used in fabrication where higher production is required. The process needs electricity to produce heat, electrode or filler wire for the joint and inert gas to protect the welding joint from the air in the form of an inert gas of Co2. We ask you to buy MIG welder and if a robot is used in this welding process this welding becomes automatic. This MIG welding process is fast, cost effective and produces more welding units in a small period of time so it is a more effective method of welding.

The types of wire used are Carbon steel, stainless steel, and Aluminium. The wire feeder needs special change for the Aluminium wire filler. The carbon steel is best suited for the MIG welding. The welding by MIG are as welding is clean without smoke, very cheap, fast, time-saving in changing of the electrode is minimum so time efficient. It is good for spot and tack welds

IGBT Inverter Based 400 Amps MIG/MAG Welding Machine Power source Consist of

Power Source, Wire Feeder,5 Interconnection Cable, MIG Torch – 3 Mtrs,3Mtrs Earth Cable with Earth Clamp ,Co2 Regulator & Heater Core Assembly

Product Details:

ESAB Make 400 Amps MIG Welding Machine

Model : ARISTO MIG 4004i PULSE

Package Consist of

ARISTO MIG 4004i PULSE Power source

ARISTO FEED 3004w ENCL 10P Wire feeder

ARISTO PENDANT U8_2 PLUS

CON SET AA 5M CAN 70MM2 10P

PSF 405 3M – MIG Welding Torch

Co2 Regulator & Heater core Assy 

Product Details:

Make: ESAB  Model: Buddy Tig 200 HF

Inverter Based 200Amps TIG Welding Machine with TIG Torch-4 Mtrs Welding cable with electrode holder, 3 Mtrs Earth cable with Earth clamp

Product Details:

ESAB Make 220 Amps Ac/Dc TIG Welding Machine.

Model : CADDY TIG 2200i TA34,Package consist of

Power source with 3Mtr supply cable + Return cable

With Earth clamp  4Mtr Gas Cooled TIG

Torch + Argon Regulator

Product Details:

300Amps Tig Welding Machine Consists of:

·         Power Source,

·         Water Cooling Unit,

·         4 Mtr Water Cooled Tig Torch,

·         Earth Cable,

Argon Regulator.

Product Details:

Make: ESAB Model : Buddy Tig 400I

400Amps Tig Welding Machine Consists of:

·         Power Source,

·         Air Cooled Tig Torch

·         Earth Cable

Argon Regulator

Product Details:

ESAB Model: CPRA 1250i IGBT Based Power Source CPRA1250i+SAW TRACTOR CPRA are delivered With 2m track, 1set of Control Cable,

2nos of Cu 95sqmmWelding  Cable(each 15mtr),

2nos of Cu 95sqmm welding cables with earth clamp (each 5mtr)

Product Details:

Make :ESAB Model :TRANSWELD 400

400 Amps Transformer Arc Welding Machine

TIG 310i is a digitally controlled AC/DC TIG inverter welding power source with HF start and consistent, stable arc in both DC and AC modes. Its Integrated cooling unit ensure trouble free welding for heavy duty applications.

• Pulsing in both AC/DC operation
• AC Balance adjustment
• Integrated cooling unit with Flow sensor
• In-built protections against overheating, under voltage and coolant flow failure

Application Areas:

• Process industry
• Pipe and tube manufacturing
• General fabrication
• Shipbuilding and offshore
• Automotive
• Repair and Maintenance

Product Details:

HandyArc 200i is an IGBT based single phase welding inverter machine for stick welding

Features:

• Suitable for all type of electrode.
• In built protection with error indicator.
• Ready to Weld –holder, earth-clamp & cables.

Product Details:

ARC 200i is an IGBT based single phase welding inverter for continuous stick welding for light/ medium duty applications. 

Features:

• Thermal Protection against over-heating, Forced Air Cool -for efficient cooling. 
• User friendly controls –Adjustable arc force.
• Ready to Weld –holder, earth-clamp & cables.

Product Details:

Aluminum Pulsed TIG Welding Machine
 Make :ESAB Model : ORIGO TIG 4300iw AC/DC

Microprocessor Inverter Based Digital 430 Amps

This Machine Consist of following:

·         430 Amps TIG Welding Power source

·         In Built Water Cooling Unit,

·         TA 24 AC/DC Control Box,

·         4Mtrs Water cooled Tig Torch,

·         Earth Cable 3Mtrs,

Argon Regulator

Product Details:

Make: ESAB   Model: Cut Master 60

60Amps IGBT Inverter Based Heavy Duty Plasma Cutting Machine with  Plasma Cutting Torch, Air Regulator & Earth Cable with Clamp

Product Details:

CPRA 1250i is a heavy duty IGBT based inverter power source with multi-process capability designed for high productivity SAW & gouging applications. SAW Tractor CPRA is a tractor mounted SAW welding head for a wide range of applications.

• Heavy duty - rated at 1250A / 100% duty cycle,suitable for 24x7 usage.
• Wide mains voltage tolerance - 415V+/-15%.
• Multi-process - suitable for SAW, MMAW and ARC Air Gouging (AAG) upto 10mm electrodes.
• SAW Tractor CPRA - 4 roll drive for smooth wire feeding for 2.0 - 6.0mm diameter wires and provided with mechanical pointer for tracking.
• In-built protections against overheating, overcurrent and under voltage.